Concrete Poker Risk Assessment
Posted By admin On 07/04/22The PLIBEL checklist for concrete workers task of casting the conventional concrete reports a moderate percentage (38.1%) Table 4, for risk factors present for the lower back, and low percentage (36.4%) of risk factors present for the neck, shoulder, upper back, elbow, forearm and hands.
Produced on the surface of concrete using Surface vibrators, or; Produced in the entire concrete mass using Vibrating table. Types of Vibrators Used for Concrete Compaction. Therefore vibrators are commonly of 4 different types, such as: Internal or Immersion or Poker or Needle Type Vibrator; Shutter form or External Type Vibrator. METHOD STATEMENT & RISK ASSESSMENT SIGNING SHEET. Poker Vibrator 75mm 12m/s2 21mins Unknown 8hrs (SNR 25) SEGREGATION: Due to the requirement for constantly moving plant on site, it is impractical to have a permanent pedestrian route. However, a walkway through the site will be demarcated in Chapter 8 barriers so that it. RISK ASSESSMENT INFORMATION Potential Hazard(s) Hearing Damage Risk Level Medium/High Control Measures Hearing protection with a rating of SLC80db 26-360Db must be worn. Note warning label on unit. Explosion or fire from fuel vapours Risk Level Medium Control Measures Stop engine before refuelling. Do not refuel while hot. RISK ASSESSMENT IN THE CONSTRUCTION PROJECTS Construction workers build, repair, maintain, renovate, modify and demolish houses, office buildings, temples, factories, hospitals, roads, bridges, tunnels, stadiums, docks, airports. Concrete and terrazzo finishers Awkward postures. Glaziers Awkward postures Insulation workers Synthetic.
Concrete Poker Risk Assessment Scoring
|
Consolidation of concrete with a concrete vibrator The purpose of using a concrete vibrator is to consolidate fresh concrete as it is placed to remove air voids.
| 1-5 Users6-10 Users
|
Example Safe work method statement / job safety analysis for using a concrete vibrator |
The sample safe work method statement is an extract of the first two identified health and safety hazards for the operation and use of a concrete vibrator.
- The business logo and administrative details you provide at time of purchase shall replace those that you see in the sample safe work method statement/job safety analysis.
Using a concrete vibrator safe work method statement |
|
| ||
Consultation not undertaken with workers as to the safe method of operating a concrete vibrator for the consolidation of concrete. | Workers shall be exposed to risk of death, serious injury or illness where the consolidation of concrete with a concrete vibrator is performed or undertaken incorrectly. Sustainable injuries/illnesses would include but not be limited to:
| The consolidation of concrete with a concrete vibrator shall be undertaken in accordance with any manufacturers instruction and any instructions provided by Electrical Plumbing Group . | Electrical Plumbing Group has a duty to ensure the health and safety of themselves, workers and other persons.
Consultation Consultation shall occur between line management, workers and health and safety representatives as to the safe method by which to operate a concrete vibrator for the consolidation of freshly placed concrete. The process of consultation shall assess hazards generated from vibrating freshly placed concrete with a concrete vibrator and take into consideration:
Electrical Plumbing Group shall make a safe work method statement prepared for the operation of a concrete vibrator in the consolidation of freshly placed concrete available for perusal by workers. Following the implementation of controls the risk should reduce to: |
|
| ||
Introduction of hazards generated from the operation of a concrete vibrator in the consolidation of freshly placed concrete as a result of implementing proposed control measures. | Workers shall be exposed to risk of death, serious injury or illness where hazards are created as a result of implementing proposed control measures. Sustainable injuries/illnesses would include but not be limited to:
| Control measures as per the hierarchy of controls shall be developed and implemented where additional hazards are generated as a result of consolidating concrete with a concrete vibrator. | Electrical Plumbing Group shall ensure hazards generated from the consolidation of concrete with a concrete vibrator are identified with the hazard controlled. Control measures To prevent risk of death, serious injury or illness to workers and other persons, the person with management or control of the works shall ensure:
Following the implementation of controls the risk should reduce to: |
Additional hazards and risks identified with the operation and use of a concrete vibrator for which control measures have been developed as per the risk identification process include:
How do you keep employees and clients current and up to date? Simple each user be they an employee, contractor or client is assigned a unique username and password to access the controlled version for the operation and use of a concrete vibrator jsa/swms online.
As a WHS online safe work method statement or job safety analysis subscriber WHS shall:
Ordering is simple
Upon receipt of payment notification WHS shall:
| Shoppers who bought the concrete vibrator safe work method statement/job safety analysis also purchased.
|
DOZER - RISK & HAZARD ASSESSMENT - HAZARD ANALYSIS - MELBOURNE, VICTORIA
Questions asked in the DOZER Risk and Hazard Assessment with the identification of risks and hazards associated with the DOZER. Compliant Industries Group hazard and risk assessors are experienced on the plant and will go through every aspect of your DOZER in a thorough process.
The areas covered in the comprehensive DOZER risk and hazard report are:
1. ENTANGLEMENT: Can anyone’s hair clothing, gloves, necktie, jewelry, cleaning brushes, rags and other materials become entangled with moving parts of plant or materials in motion?
2. CRUSHING: Can anyone be crushed
3. CUTTING: Can anyone be cut, stabbed or punctured
4. SHEARING: Can anybody’s body parts be sheared between two parts of the plant or between a part of the plant and work structure?
5. HIGH TEMPERATURES: Can anyone be burnt due to contact with moving parts or surfaces of the plant or materials handled by the plant?
6. STRIKING: Can anyone be struck by moving objects
7. HIGH PRESSURE FLUID: Can anyone come into contact with fluids under high pressure?
8. ELECTRICAL: Can anyone be injured by electrical shock or burnt
9. FALLING – SLIPPING: Can anyone using the plant or in the vicinity of the plant, slip, trip or fall from heights over 2 meters?
10. ERGONOMIC: Can anyone be injured
11. SUFFOCATION: Can anyone be suffocated due to lack of oxygen or atmospheric contamination?
12. OTHER HAZARDS: Can anyone be injured or suffer ill-health from exposure to chemicals, toxic gases, or vapours, fumes, dust, noise, vibration, radiation or other factors not mentioned?
The Employer with a DOZER have obligations under OHS/WHS legislation to provide that DOZER in a safe condition.
Part of this safety process requires risk and hazard assessment of the DOZER to be carried out, identifying the risks and hazards associated with its operation. This introduces safe operational controls to safeguard the operator and personnel working around the DOZER.
Compliant Industries qualified plant/equipment & machinery risk and hazard assessors are experienced in a wide range of industries in civil construction, mining, transport, forestry, agriculture and oil & gas industries.
We thoroughly inspect and report on the current requirements stated in the OHS/WHS Act. We track your risk and hazard assessmments with a reminder service and contact you a month in advance of your risk and hazard assessment expiring giving you the peace of mind that your business plant and equipment are safe and compliant.
Risk and hazard assessments can be carried out onsite in or at the place of work. A comprehensive risk and hazard report and inspection compliant safety sticker and required decals are issued on completion. Call today for great discounts on more than 1 item